Realm Engineering - cars

toplog.gif - 2831 Bytes

D Type Jaguar	LR 'D' Type and XKSS Option A - Body/Chassis Unit Chassis - Reynard Racing designed backbone space frame chassis fully bracketed to accept mechanicals, steering arms and bonnet/radiator mounting frame and differential mounting bracketry. Chassis and components are shotblasted and powdercoated in a silver finish. Bodywork - All D' Type body variants available including XKSS are authentically shaped and produced in composite QRP material and interior panels are in a smooth aluminium style GRP. click to view components available to finish Prices D Type all body variants - £4850.00 XKSS - £5660 All prices plus VAT Option B - Body/Chassis Unit Plus Our body/chassis plus units have been developed from experiences gained after supplying 300+ units over the last 15 years. Certain areas of the build process were noted to be time consuming first time around, to this end our body/chassis plus unit covers these areas, the parts supplied and fitted are specifically deigned for our cars and would be needed to be acquired during this part of the assembly. All that is needed, is to install engine, gearbox and axles and the mechanical build up of the project is complete. Chassis - Reynard Racing designed backbone space frame chassis fully bracketed to accept mechanicals, steering arms and bonnet/radiator mounting frame. Corrected length rear lower wishbone and driveshafi (exchange) and differential mounting bracketry. Chassis and components are shotblasted and powdercoated in a silver finish. Mechanical parts supplied and fitted Braking: Fabricated pedal box to include leg length adjustment, balance bar facility on braking, brake and clutch master cylinders (3), hard and flexible brake lines including brake light switch installed, period handbrake and cable. Steering: Steering column, intermediate shaft, and steering rack complete with track rod ends. Misc: Front anti-rollbar, 6 off Coil over shock units, fuel line, period radiator and aluminium header tank, Rollover bar. Bodywork: All D' Type body variants available including XKSS, authentically shaped and produced in composite GRP material, interior panels are in a smooth aluminium style GRP, engine bulkhead is clad using 18g aluminium. The body is fitted to the chassis, bonnet, boot and door(s) are hinged and locks fitted, all screens and headlamp covers are fitted. Prices D' Type (all variants) £7,450.00 XKSS £8,250.00 All prices plus VAT click to view supplementary price list for D Type click to view supplementary price list for XKSS Variants

Jaguar Parts Required

Front axle components:	Series II onwards XJ6
Rear axle components:	Any independant - except E Type and MK10
Prop shaft:
Engine/gearbox inc ancillaries: Manual conversion kits available	NOTE steel engine mount MKII/S Type Oil Filter system mid series 2 XJ6 (Vertical Filter) Both E Type and MK10 sump will not fit chassis
Engine/gearbox metalastic mounts:	3 XJ6 engine mounts
Speedo/rev counter:	Early 5"type
Supplementary gauges and switches:	Pre XJ6 Series 1
Registration document

E Type Jaguar	Detail

C type Jaguar	Heritage 'C' Type
	Option A - Body/Chassis Unit Chassis - Fully bracketed space frame similar to original to include steel front bulkheads and aluminium skinned floors. Purpose made steering arms and differential mounting hardware, chassis and components are shotblasted and powdercoated in silver finish Bodywork: Handcrafted composite panels to include bonnet with inner wheel arches and flush fit aluminium louvre panels, centre section with 2 doors (single door option) and tail section including boot lid. All panels trimmed to suit and supplied with mountings. click to view components available to finish Price £4450.00

	Option B - Body/Chassis Unit Plus Our body/chassis plus units have been developed from experiences gained after supplying 300+ similar units over the last 15 years. Certain areas of the build process were noted to be time consuming first time around, to this end our body/chassis plus unit covers these areas, the parts supplied and fitted are specifically deigned for our cars and would be needed to be acquired during this part of the assembly. All that is needed, is to instalL engine, gearbox and axles and the mechanical build up of the project is complete. Chassis: Fully bracketed space frame similar to original to include steel front bulkheads and aluminium skinned floors. Purpose made steering arms, differential mounting hardware and corrected length rear lower wishbones and driveshafis (exchange), chassis and components are shotbiasted and powdercoated in silver finish Mechanical parts supplied and fitted. Braking: Fabricated pedals to include leg length adjustment, brake and clutch master cylinders to include Servo unit, hard and flexible brake lines including brake light switch installed, period handbrake and cable. Steering: Steering column, steering knuckle, and steering rack complete with track rod ends. Misc: Front anti -rollbar - fuel line Parts supplied: 4 off Coil over shock units, and period radiator. Bodywork: Handcrafted composite panels to include bonnet with inner wheel arches and flush fit aluminium louvre panels, centre section with 2 doors (single door option) and tail section including boot lid, engine bulkhead is clad using 18g aluminium. The body is fitted to the chassis, bonnet, boot and door(s) are hinged with locks fitted, windscreen and headlamp covers are fitted. click to view components available to finish Price £6,950.00 All prices plus VAT

Jaguar Parts Required

Front axle components:	Series II onwards XJ6
Rear axle components:	Any independant - except E Type and MK10
Prop shaft:
Engine/gearbox inc ancillaries: Manual conversion kits available	NOTE steel engine mount MKII/S Type Oil Filter system mid series 2 XJ6 (Vertical Filter) Both E Type and MK10 sump will not fit chassis
Engine/gearbox metalastic mounts:	3 XJ6 engine mounts
Speedo/rev counter:	Early 5"type
Supplementary gauges and switches:	Pre XJ6 Series 1
Registration document